Residential Roof Installation Services for North Dallas Homes
A roof installation is a decision you’ll live with for 20 years or more. Collins Roofing & Restoration has installed residential roofs across Plano, Sachse, Wylie, and the surrounding North Dallas area since 2013. Every job starts with a full decking inspection and ends with a homeowner walkthrough.
Replacement Installation vs. New Construction: What’s Different
If your existing roof has reached the end of its service life or suffered significant storm damage, a replacement installation starts with removing the existing roofing system. We tear the old material away, inspect the exposed decking, address problems that need attention, and install the new roof system from the deck up. If you’re already dealing with a damaged or aging roof, our Roof Replacement service covers the decision-making and insurance side in more depth.
New construction is a different job. Collins works with homeowners and builders on new construction installations, primarily in the Sachse, Wylie, Frisco, and Allen areas. There’s no tear-off. We start on bare decking, which gives us a clean view of the full structure before anything goes down. Coordination with your general contractor and build schedule is part of the process either way.
How Collins Installs a Roof: Step by Step
Each stage of the roof installation process affects how the finished system handles North Texas heat, heavy rain, hail, and wind.
1. Detailed Written Estimate
We measure the roof, assess its current condition, and provide a fully itemized written estimate with materials and labor broken out separately. You know exactly what you’re paying for before the job starts, and that number doesn’t move unless something unexpected turns up during the tear-off. And if it does, we document it and get your approval before continuing.
2. Material Ordering & Scheduling
Once you approve the estimate, we order materials and get the job scheduled, typically within one to two weeks. Materials arrive the morning of or the day before the job, and we confirm your start time in advance.
3. Site Protection
Before tear-off begins, we protect landscaping and vehicles around the perimeter with tarps to catch falling debris and nails. It’s a detail many contractors skip, and homeowners with gardens, vehicles, or kids in the yard notice it right away.
4. Full Tear-Off
Every layer of existing material comes off down to the decking: shingles, underlayment, and all existing flashing. We don’t reuse old flashing on a full installation. Reusing old flashing is one of the most common shortcuts that leads to early failures around chimneys, skylights, and wall intersections.
5. Complete Decking Inspection
With the decking exposed, we inspect every board before anything new goes down. Soft spots, rot, water damage, and improper original construction are identified, photographed, and reviewed with you directly. Any scope change requires your written approval before work continues.
6. Drip Edge Installation
New drip edge goes in along the eaves and rakes. It directs water away from the fascia and into the gutters, and its absence is a common cause of fascia rot on older homes.
7. Underlayment & Ice and Water Shield
Synthetic underlayment covers the full roof deck. Ice and water shield goes in at the most vulnerable areas, including eaves, valleys, and around penetrations. This self-adhering membrane gives you a secondary waterproof layer where water backup and wind-driven rain do the most damage.
8. Shingle Installation
Shingles go on from the bottom up, overlapping to manufacturer specifications. We nail to the pattern the manufacturer requires, not whatever’s fastest for the crew. Improper nailing is one of the leading causes of shingle blow-off in high-wind events.
9. Full Flashing Installation
Areas where the roof meets another surface deserve particular attention. Chimneys, skylights, pipe penetrations, walls, and other transitions all create potential paths for water if they are not properly detailed. The installation therefore includes appropriate flashing around these vulnerable areas.
10. Ridge Cap & Final Detail
Ridge cap shingles go on along the full peak, and we do a final check across every penetration and edge before the crew comes down.
11. Cleanup & Homeowner Walkthrough
The job isn’t finished when the last shingle is installed. The property needs to be cleaned, roofing debris removed, and the work area checked for leftover materials and fasteners. We walk the finished installation with you, show you job photos, explain what was done and why, and answer any questions before we leave.
Roofing Materials Collins Installs
The right roofing material depends on your home’s roof pitch, structure, exposure to North Texas weather, budget, and long-term plans.
Architectural Asphalt Shingles
Architectural asphalt shingles are a practical choice for many North Texas homes because they offer a balance of appearance, performance, and upfront cost. They are available in a wide range of styles and can provide the look many homeowners want without the higher initial investment associated with premium roofing materials. Expect a lifespan of 20–25 years with proper ventilation and maintenance.
Impact-Resistant Class 4 Shingles
If your home has experienced repeated hail damage, impact-resistant shingles may be worth considering. Class 4 is the highest impact-resistance classification under the UL 2218 standard, and these shingles are designed to withstand greater impact than standard products. Depending on the insurer and policy, qualifying impact-resistant roofing may also qualify for a premium discount.
Metal Roofing – Standing Seam
Metal roofing can make sense when your priority is long-term durability rather than the lowest initial installation cost. Standing seam metal lasts 40–50+ years in Texas conditions, roughly double asphalt’s lifespan. Its reflective properties reduce attic heat load, which matters in a market with sustained 100°F summers. The upfront cost is higher, but the substantially lower lifetime cost is modeled over a 40-year horizon.
Tile Roofing
Tile can provide a distinctive appearance and long service life, making it an option for certain higher-end homes and architectural styles. However, tile is substantially heavier than asphalt shingles, so the home’s structure must be able to support the added load.
Flat / Low-Slope Systems – TPO
Homes with flat or low-slope sections require a roofing approach that differs from conventional pitched roofs. Drainage, membrane selection, penetrations, and detailing become especially important because water doesn’t shed from these surfaces the same way.
Why Flashing Replacement Matters More Than Most Homeowners Realize
Most contractors reuse existing flashing on a full replacement. It’s faster, and it’s cheaper. But flashing that’s been through years of Texas heat cycling has sealant that’s compromised at the edges and joints, even when the metal still looks fine. That’s why leaks tend to show up two to four years later, right at the chimney base, skylight frames, or wall intersections.
Collins Roofing replaces all flashing on every full installation. Not new sealant over old metal; it’s full replacement. It adds cost and time up front, but it means your warranty is backed by new components.
What Does a Roof Installation Cost in North Dallas?
These are rough ranges based on typical jobs in the Plano and North Dallas market. Your actual cost depends on your roof’s condition and complexity.
| Home Size & Type | Material | Typical Range |
|---|---|---|
| Single-story, 1,800–2,200 sq ft | Architectural asphalt shingles | $9,000 – $13,000 |
| Two-story, 2,500–3,500 sq ft | Architectural asphalt shingles | $14,000 – $20,000 |
| Single-story, 1,800–2,200 sq ft | Class 4 impact-resistant shingles | $11,000 – $16,000 |
| Single-story, 1,800–2,200 sq ft | Standing seam metal | $18,000 – $30,000+ |
A few things move the number:
- Decking condition: damaged boards found during tear-off add cost.
- Roof complexity: valleys, dormers, and extra penetrations add labor time.
- Pitch: steeper roofs need more safety equipment and take longer.
- Material upgrades: Class 4 typically adds 15–25% over standard architectural.
The only accurate number comes from a written estimate after we’ve seen your roof, and that estimate is free.
Roof Installation Across North Dallas
Collins Roofing & Restoration serves homeowners throughout North Dallas, including Sachse, Plano, Wylie, Murphy, Richardson, Garland, Allen, McKinney, and Frisco. If you’re planning a new roof, the team can assess your home and help determine which roofing system fits the property and your priorities.
Planning a roof installation in Plano? See our dedicated Plano roofing page for additional local information.
Roof Installation Common Questions
How long does a roof installation take?
Most single-story homes are done in a day with a full crew. Two-story homes or complex rooflines usually take two days. Significant decking damage, steep pitch, or complicated flashing can extend that. We’ll give you a realistic timeline before we start.
Do you replace all flashing during an installation?
Yes, on every full installation. New sealant over old flashing isn’t the same as new flashing. Old metal that’s been through years of Texas heat cycling can have compromised seals, even when it still looks intact.
What happens if you find damaged decking during tear-off?
We stop, document it with photos, and brief you before anything continues. On insurance jobs, we submit a supplement to cover decking outside the original approved scope. You approve any additional work in writing before we proceed; no surprise charges.
Do I need a permit for a roof installation in Sachse or Plano?
Yes. Permits are required for full roof installations in Sachse, Plano, and most Collin County municipalities. We pull permits on every applicable job. It protects you, because unpermitted work can surface during a home inspection at resale.
What’s the difference between roof installation and roof replacement?
The terms are often used interchangeably, but a roof replacement specifically involves removing an existing roof and installing a new roofing system. A new-construction installation starts with the home’s bare decking, so there is no existing roof to tear off.
How do I know which roofing material is right for my home?
We look at your roof’s pitch, existing structure, weather exposure, and your budget and timeline. For most North Texas homes, architectural asphalt shingles hit the right balance of cost and performance. If hail is a recurring issue where you live, Class 4 impact-resistant shingles are usually worth the premium. A free estimate visit includes a material recommendation specific to your home.
Get a free, written estimate from Collins Roofing & Restoration detailed, line-item, and specific to your home. We serve Plano, Sachse, Wylie, and all of North Dallas.